bannertop
    DANH MỤC
Orion Display
HuyndaiIT
Lenel
   Software
   Hardware
Truvision Camera
Sony Camera
Watec Camera
Anli Camera
Spacecom Lens
X-View Video Wall Controller
Datapath Video Wall Controller
DIDOSOFT
Tvisual Video Wall
Shiguo Camera
Avex Camera
Thiết bị trình chiếu
Camera chống cháy nổ
Thiết bị chuyên dụng
Hỗ trợ trực tuyến
Kinh doanh
hoanglv@ht-tech.com.vn
: Kinh doanh
Kinh doanh
+84 913256359
toantt@ht-tech.com.vn
: Kinh doanh
Kinh doanh
+84 946227388
vvtoan@ht-tech.com.vn
: Kinh doanh
CÔNG TY HT TECH
Địa chỉ: 13rd F, CT9 Building, Dinh Cong, Hoang Mai, Hanoi
Tel: 024 62852005
Fax: 024 62852007
Hotline: 0946227388
Email: info@ht-tech.com.vn
http://ht-tech.com.vn
Số người online
120
Số lượt truy cập
5.115.732

LENEL LNL_TS_1320S2

Mã sản phẩm: LNL_TS_1320s2
Hãng: LENEL
Giá: Liên hệ

LNL-1320 Series 2


Overview
Lenel offers a Dual Reader Interface (DRI) module for access control solutions. Most access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0 or Clock/Data communication are supported, as are those that support the bidirectional RS-485 Open Supervised Device Protocol (OSDP). Lock, unlock, and facility code offline access modes are supported o­n all readers connected to the DRI. Each DRI supports up to eight different card formats as well as issue codes for both magnetic and Wiegand card formats.
The DRI provides a vital link between the Intelligent System Controller (ISC) and the card reader attached to the interface. As many as 32 DRI modules can be multidropped using RS-485 2-wire or 4-wire communication up to 4,000 feet per port away from the ISC. Each DRI module is individually addressed for increased reporting capabilities with o­nGuard® access control software applications. The DRI includes eight inputs that support normally open, normally closed, supervised, and non-supervised circuits. In addition, six output relays support fail-safe or fail-secure operation.

Features & Functionality
• 12 or 24 VDC power supply
• Supports Data1/Data0, Clock/Data and Lenel OSDP-compatible RS-485 readers and keypads
• Downloadable firmware
• Six Form-C 5 A at 28 VDC relay outputs
• Up to 16 different formats (8 card formats and 8 asset formats)
• Issue code support for magnetic and Wiegand formats
• Door contact supervision (open/closed)
• REX push-button monitor
• Strike control output
• Bicolor reader status LED support and 2-wire LED support
• Beeper control
• Dedicated tamper and power failure circuits
• Support for offline reader access mode
• o­n-board jumpers for termination
• o­n-board regulator allows 12 VDC reader support from 24 VDC power source
• DIP switch-selectable addressing

 

Specifications

 

Primary Power

12 to 24Vdc ±10%, 550mA maximum (plus reader current)
12Vdc @ 450mA (plus reader current) nominal, 18.41 BTUs
24Vdc @ 270mA (plus reader current) nominal, 22.09 BTUs

Outputs

6 outputs, Form-C, 5A @ 28Vdc, resistive

Inputs

8 unsupervised/supervised, standard EOL: 1k/1k ohm, 1% 1/4 watt 2 unsupervised, dedicated for cabinet tamper and UPS fault monitoring

Reader Interface

Reader power: 12Vdc ±10% regulated, 125mA maximum each reader (jumper selectable and input voltage (VIN) must be 20Vdc minimum) or 12 to 24Vdc ±10% (input voltage passed through) 125mA maximum each reader

Reader Port Compatibility

Wiegand Data 1/Data 0; Magnetic Clock/Data; F/2F Single Wire;
Open Supervised Device Protocol

Mechancia

Dimension: 6” (152mm)W x 8” (203mm)L x 1” (25mm)H
Weight: 11 oz. (312g) nominal

Environmental Temperature

Operating: 32°F to 158°F (0°C to +70°C)
Storage: -67°F to 185°F (-55°C to +85°C)

Humidity

0% to 95% RHNC

Compliance Approvals

FCC Part 15, CE, RoHS, UL 294, UL 1076, ULC CSA-C22.2, CAN/ULC-S319-05, cUL/ORD-C1076

 

 CÙNG THỂ LOẠI
LENEL LNL_TS_1100s2
LENEL LNL_TS_1100s2
LENEL LNL_TS_1200s2
LENEL LNL_TS_1200s2
LENEL LNL_TS_1300s2
LENEL LNL_TS_1300s2
LENEL LNL_1300e_ds
LENEL LNL_1300e_ds
LENEL LNL_TS_2210
LENEL LNL_TS_2210
LENEL LNL_TS_2220
LENEL LNL_TS_2220
LENEL LNL_TS_3300
LENEL LNL_TS_3300
LENEL LNL_TS_8000
LENEL LNL_TS_8000
Xem thêm
Giới thiệu và chính sách HT-Tech
Giới thiệu công ty Tin tức sự kiện
Liên hệ Hỏi đáp
Hình thức thanh toán Lắp đặt bảo trì
Chính sách bảo hành
CÔNG TY HT TECH
Tel: 024 62852005 - Fax: 024 62852007
Hotline: 0946227388
Địa chỉ: 13rd F, CT9 Building, Dinh Cong, Hoang Mai, Hanoi
Liên hệ từ 8h đến 18h các ngày trong tuần trừ chiều thứ 7 và cả ngày chủ nhật
© 2018 CÔNG TY HT TECH