MÔ ĐUN GIẮC CẮM 1000 BASE-T / SFP

Module Name

1000 Base-T SFP module, 3.3V/5V 100m UTP5 Cat 5

Feature

1.25 gigabyte Ethernet over cat 5-cable

Switch, router to switch, router link

High speed I/O for file severs

1000BASE-T copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802, 3-2002 and IEEE 802.3ab, which supporting 1000Mbps data-rate up to 100 meters reach over unshielded twisted-pair category 5-cable

The SFP Copper Module supports 1,000 Mbps full duplex data-links with 5-level pulse amplitude modula-tion (PAM) signals

All four pairs in the cable are used with symbol rate at 250Mbps o­n each pair

The SFP copper module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol
The physical IC can also be accessed via 2-wire serial bus at address ACh

Qualified to meet the intent of Bellcore reliability practices

Compliant with SFP MSA specification and SFF-8472

Links of narrow, intermediate or long reach with single or Multi-mode fiber

ROHS, CE and FCC certified

DMI feature o­n request

Specification

1000 Base-T SFP module, 3.3V/5V 100m UTP5 Cat 5. 1, 1.25G, RJ connector.

Ordering information

AN-UM-SFP-T

1000 Base-T SFP module, 3.3V/5V 100m UTP5 Cat 5. 1, 1.25G, RJ connector

AN-UM-SFP-T-AS

10/10/1000 Base-T SFP module, 3.3V/5V 100m UTP5 Cat 5. 1, 1.25G, RJ connector (Autosensing)