BỘ MỞ RỘNG TỔNG HỢP PON 1U

Parameters

AN-PON-AGG-1U

Device Dimensions (mm)

44 (H) * 445 (W) * 325 (D) mm

Power supply

DC -48 / -60V or

AC 110 ~ 220V or

DC -48/-60V and AC 110~220V (mixed)

Installation Method

Cabinet installation

The maximum number of wave lengths

4

Service slots

2

Single-channel maximum rate

10Gbit / s

Cross particle

ODU1 ODU2

Optical fiber interface

LC / UPC, SC / UPC

Transmission fiber

G.652 G.653 G.655

Protection mode

Device level protection: 1 + 1 power backup
Network level protection: OTU2 SNCP protection o­n line side

Transmission technology

CWDM (G.694.2)

2.5G /10G line rate

Electrical cross

Fixed rate crossing based o­n ODU1 / ODU2 port

Network topology

Point to Point

Features

Description

Basic function

Supports general management o­n SC card.

Supports configuration management, alarm management, performance management, fault management etc. for PAE service card.

Supports in-band management?

Supports in-band DCN management.

Supports processing and forwarding synchronization information internally.

Supports monitoring and management o­n FAN and Power supply.

Supports 8-channel GPON / EPON aggregation. Supports multiplexing / de-multiplexing between PON signal and ODU2.

GPON mode: supports 4 x GPON signal multiplexed into 1 x OTU2, up to 8 x GPON signal generated into 2 x OTU2 per card; The OTU2 interfaces are independent.

EPON Mode 1: supports 8 x EPON signal multiplexed into 1 x OTU2

EPON Mode 2: supports 4 x EPON signal multiplexed into 1 x OTU2, up to 8 x EPON signal generated into 2 x OTU2 per card; The OTU2 interfaces are independent.

OTN function

Supports PM, SM overhead processing o­n the line-side interface, support TTI.

Supports scrambler and descrambler.

GPON: 2.5G<->ODU1<->ODU2<->LINK

EPON: 1.25G<->2.5G<->ODU1<->ODU2<->LINK

Support FEC G709.

Line protection

GPON mode: supports 1+1 protection for 4 x GPON signals.

EPON Mode 1: do not support line protection.

EPON Mode 2: supports 1+1 protection for 4 x EPON signals.

PON port -processing

Support 3R function for PON port.

GPON <->ODUk mapping

Downlink: supports alarm monitor for GPON OLT downstream interfaces o­n client side; supports ODU1 de-mapping for GPON downstream signals o­n o­nU side.

Uplink: supports alarm monitor for GPON o­nU upstream interfaces o­n client side; supports 1.244G <->ODU1 mapping o­n o­nU side.

Supports overhead processing for PM layer.

EPON <-> ODUk mapping

Downlink: supports alarm monitor for EPON OLT downstream interfaces o­n client side; supports ODU0 de-mapping for EPON downstream signals o­n o­nU side.

Uplink: supports alarm monitor for EPON o­nU upstream interfaces o­n client side; supports 1.244G <->ODU0 mapping o­n o­nU side.

Supports overhead processing for PM layer.

ODUk GCC function

GPON Mode: supports 2 independent GCC0.

EPON Mode 1: supports 1 GCC0.

EPON Mode 2: supports 2 independent GCC0.

PON proxy

GPON mode: supports GPON range proxy, supports GPON leading compensation.

EPON mode: supports EPON idle compensation.

PM and alarm monitoring

Supports alarm monitoring and alarm management, such as alarm suppression, alarm reversal, alarm shielding, and so o­n.

Supports PM and PM monitoring, such as zero suppression performance, current performance, and historical performance and so o­n.

Service card hot swap

Support

Optical transceiver management

Supports DDM.

Supports hot swap.

Ordering information

AN-PON-AGG-1U

PON aggregation extender unit - rack mount 1U