|
LNL-3300
Overview
The LNL-3300 Intelligent System Controller (ISC) by Lenel is designed for advanced access control applications. As the access control engine for the onGuard® system, the ISC provides power and functionality. The ISC can communicate to the host computer in a single- or dualpath configuration of Ethernet, dial-up or direct connect RS-485 communication. Multiple combinations of Input Control Modules, Output Control Modules and Card Reader Interface Modules (up to 64 devices) can be configured.
Utilizing its native Ethernet communications and an advanced 32- bit processor, the LNL-3300 can communicate upstream to the host computer through its primary Ethernet port, with throughput up to 8 times greater than the fastest serial connections. The secondary port can communicate at up to 115.2 Kbps using 2-wire RS-485 multidrop, dialup, or an Ethernet daughterboard connection.
The LNL-3300 can store up to 500,000 cardholders in non-volatile flash memory, and supports selective download for larger cardholder databases. The two downstream RS-485 2-wire ports can be used to connect up to 64 devices (64 doors) in many combinations of LNL-1100, LNL-1200, LNL-1300, LNL-1320, LNL-500B, and LNL-500W modules.
Features & Functionality
• on-board high-speed Ethernet 10/100Base-T upstream port provides up to 8 times higher throughput than serial-to-Ethernet converters. DHCP and fixed IP addressing supported.
• DNS device naming through DHCP extended commands
• Host dual path communication enabled - on-board Ethernet TCP/IP, direct wire (RS-485, 2-wire multidrop capable), or dialup communications
• 15 MB of available on-board, non-volatile flash memory
• Battery-backed, non-volatile storage of 50,000 events
• Firmware stored in flash memory, background download of firmware updates supported
• 12 or 24 VDC input power
• Supports up to 16 different formats (8 card formats and 8 asset formats)
• Biometric template storage support for Schlage Recognition Systems®, Bioscrypt®,and Identix®
• Enhanced anti-passback capabilities
• Up to 32,000 access level permissions
• 255 holidays with grouping
• 255 timezones, each with 6 intervals
• Elevator control support for up to 128 floors
• Alarm masking
• Individual extended held open and strike times (ADA required)
• Up to 9-digit user PIN codes
• Status LEDs for heartbeat & battery status, upstream and downstream communication, and memory write status
• Two dedicated inputs for tamper and power failure status
• Advanced Encryption Standard (AES) 128-bit algorithm for communications Specifications Primary Power (DC or AC) | The LNL-3300 is for use in low voltage, power-limited, class 2 circuits only | DC input | 12 or 24 VDC ± 15%. 500 mA maximum | AC input | 12 VAC ± 15%. 400 mA RMS | Memory and Clock backup | 3 V lithium, type BR2325, BR2330, CR2330 | Communication Ports | Primary (Ethernet) Port 0 | 10/100Base-T Ethernet high-speed port | Secondary Upstream Port 1 | RS-485 (2-wire) or RS-232 9600 to 115.2 Kbps async, optional Ethernet serial server | Downstream Ports 2-3 | RS-485 (2-wire) 9600 to 38.4 Kbps async | Inputs | Cabinet Tamper Monitor | Unsupervised, dedicated | Power Fault Monitor | Unsupervised, dedicated | Wire Requirements | Power | 1 twisted pair, 18 AWG | RS-485 | 24 AWG twisted pair(s) with shield, 4000 ft. (1219 m) maximum | RS-232 | 24 AWG, 25 ft. (7.6 m) maximum | Inputs | Twisted pair, 30 ohms maximum | Environmental | Temperature | Operating: 32° to 158° F (0° to +70° C) Storage: -67° to 185° F (-55° to +85° C) | Humidity | 0 to 95% RHNC | Mechanical | Dimensions | 5 x 6 x 1 in. (127 x 152.4 x 25 mm) | Weight | 4 oz. (115 g) nominal | Approvals | FCC Part 15, CE, RoHS, UL 294, UL 1076, ULC CSA-C22.2, CAN/ULC-S319-05, cUL/ORD-C1076 |
|
+84 975888809
samlv@ht-tech.com.vn
;)
Xem thêm