LENEL LNL_TS_1100S2

LNL-1100 Series 2

Overview
The Lenel® Input Control Module (ICM) provides the access control system with high-speed acknowledgment of critical alarm points in monitored areas. The ICM communicates directly with the Intelligent System Controller (ISC) either by 2-wire or 4-wire RS-485 communication. The ICM has 16 configurable input control points and 2 output control relays. It supports normally open, normally closed, supervised and non-supervised circuits.
The input circuits are scanned using an analog-to-digital converter. The digitized input status signal is software-monitored and controlled, so that each input point can be programmed as a supervised or non-supervised alarm point.
The output relays can also be configured for fail-safe or fail-secure operation. Each relay supports the “On,” “Off,” and “Pulse” Lenel OnGuard® software commands.

Features & Functionality
• Grade B, A, and AA line supervision
• 12 or 24 VDC input power
• 16 programmable supervised or non-supervised contacts
• 2 Form-C 5 A, 28 VDC contacts for load switching
• 2 dedicated inputs for tamper and power failure status
• o­n-board termination jumpers
• DIP switch-selectable addressing
• Elevator control, support for 128 floors
• Status LED for host communication and heartbeat
• Variable resistor values for line supervision
• Downloadable firmware

Specifications