LENELS2 LNL-1300 SERIES 3

Overview

LenelS2TM offers a Single Reader Interface (SRI) module for access control solutions. Access control card readers, keypads, or readers with keypads that use standard Wiegand Data1/Data0, Supervised or Unsupervised F2F, or Clock/Data communication are supported, as are those supporting the bidirectional RS-485 Open Supervised Device Protocol (OSDP™). Lock, unlock, and facility code offline access modes are supported o­n all readers connected to the SRI. Each SRI supports up to 16 different card formats as well as issue codes for both magnetic and Wiegand card formats.The SRI provides a vital link between the Intelligent System Controller (ISC) and the card reader attached to the interface. As many as 32 SRI modules can be multidropped using RS-485 2-wire communication up to 4,000 feet (1219 m) per port away from the ISC. Each SRI module is individually addressed for increased reporting capabilities with o­nGuard® access control software applications. The SRI includes two inputs that support normally open, normally closed, supervised, and non-supervised circuits. Two output relays support fail-safe or fail-secure operation.

Features & Functionality

• 12 or 24 VDC power supply

• Supports Data1/Data0, Clock/Data, Supervised and

Unsupervised F2F and OSDP-compatible RS-485 readers and keypads

• Supports Open Supervised Device Protocol (OSDP) readers, including biometric template transfer and Secure Channel encryption

• Two Form-C relay outputs (5 A door strike and 1 A aux relays)

• Up to 16 different card formats

• Issue code support

• Downloadable firmware

• Door contact open or closed, supervised or non-supervised

• REX push-button monitor - supervised or non-supervised

• Strike control output

• Bicolor or 2-wire reader status LED support

• Reader beeper control

• Plastic mounting channel

• Support for offline reader access mode

• Elevator control, support for 128 floors

• Advanced Encryption Standard (AES) 128-bit algorithm for communications to ISC

• Compatible with current and previous versions of o­nGuard

Extended Functionality

• Connect o­ne FIPS-201 reader for embedded authentication (when used with LNL-4420 and appropriate HID® and o­nGuard software and licenses)

Specifications