|
Features & Functionality • DHCP and fixed IP addressing supported • DNS device naming through DHCP extended commands • Optional Secondary NIC, USB port (2.0) with optional adapter • 15 MB of available on-board, non-volatile flash memory • Battery-back, non-volatile storage of 50,000 events • Configurable option for Data at Rest encryption • Firmware stored in flash memory, background download of firmware updates supported • 12 or 24 VDC input power • Supports up to 16 badge formats • Biometric template storage support • Up to 32,000 access level permissions • 255 holidays with grouping • 255 time zones, each with 6 intervals • Elevator control support for up to 128 floors • Supports up to 9-digit user PIN codes • Status LEDs for heartbeat & battery status, upstream and downstream communication, and memory write status • Two dedicated inputs for tamper and power failure status • Advanced Encryption Standard (AES) 256-bit algorithm for communication to Lenel Series 3 reader and I/O modules; AES 128 bit encryption with Lenel Series 2 reader and I/O modules • AES128 or TLS 1.2 (with AES256 support) communication to onGuard • RNDIS Support to allow USB connection to display controller web configuration pages Specifications The interface is for use in low voltage, Class 2 circuits only. | The installation of this device must comply with all local fire and electrical codes. | Primary Power | 12 to 24 VDC ± 10%, 250 mA maximum | Primary Host Communication | Ethernet: 10-BaseT/100Base-TX | Secondary Host Communication | USB port (2.0) with optional adapter: pluggable model USB2-OTGE100 | Serial I/O Device | Two each: 2-wire RS-485, 2,400 to 115,200 bps, asynchronous, half-duplex, 1 start bit, 8 data bits, and 1 stop bit | Inputs | Two non-supervised, dedicated for cabinet tamper and power fault monitoring | Cable Requirements | Power and Relays | One twisted pair, 18 AWG | Ethernet | CAT-5, minimum | RS-485 | One twisted pair with drain wire and shield, 120 ohm impedance, 24 AWG, 4,000 ft. (1,219m) maximum | Mechanical | Dimensions | 5.0 W x 6.0 L x 1.0 H in. (127 x 152.4 x 25mm) | Weight | 4.1 oz. (115g) nominal | Environmental | Temperature | -55° to +85° C, storage 0° to +70° C, operating | Humidity | 5 to 95% RHNC | Heat Output (BTUs) | at 12 VDC, 10.2 BTU/hr at 24 VDC, 12.3 BTU/hr | Approvals | FCC Part 15, CE, RoHS, UL 294, UL 1076, CAN/ULC 60839-11-1:2016, CSA C22.2 No. 205-1983, cUL/ORD-C1076 |
|
+84 975888809
samlv@ht-tech.com.vn
;)
Xem thêm